banner

Products

Fiberglass Assembled Roving Direct Roving 600tex

Fiberglass Assembled Roving Direct Roving 600tex

Overview Product Description →Fiberglass Direct Roving: Which is coated with a silane-based sizing and compatible with u
SHARE

Description

Overview
Basic Info.
Service Jushi Roving, Cpic Roving, Taishan Roving
Qty in 20FCL 19550 Kg
Customize Accept All Customize Specification
Sample Free
Type Direct Roving, Spray up Roving, Gun Roving
Compatible Resin up, Ve, Epoxy, Phenolic Resin
Diameter of Bobbin 32cm
Roll Weight 18kg-23kg
Transport Package Plastic Film and Pallet
Specification 300Tex-1200Tex-2400Tex-9600 Tex
Trademark HONTED
Origin China
HS Code 7019390000
Production Capacity 2000 Tons/Month
Product Description

Product Description


→Fiberglass Direct Roving:
Which is coated with a silane-based sizing and compatible with unsaturated resin, vinyl resin, and epoxy resin. It used to produce gratings, various rods and profiles. Main uses include manufacture of FRP pipes of various diameters, high-pressure pipes for petroleum transitions, pressure vessels, storage tanks, and, insulation materials such as utility rods and insulation tube.

It's also called Single-end roving is the primary reinforcement for filament winding and pultrusion applications and is the input fiber used to produce woven roving and knitted fabrics.

Single-end continuous rovings are produced by pulling glass fibers directly from the furnace bushing, applying sizing to the cooling fibers, and winding them into a roving package or doff. Because of its excellent dry tensile strength, single-end rovings are ideal for high glass content applications like pultrusion and filament winding. Because the fiber is used as input for woven roving and knitted fabrics, single-end rovings are also widely use in open mold and infusion applications when configured into fabrics.

Fiberglass Assembled Roving Direct Roving 600tex -1200tex-2400tex -4800tex for Spray up/ Injection / Pipe / Panel /BMC/ SMC/ Lfi /Ltf / Pultrusion


FeaturesExcellent process Low fuzzLow frequency in machine clean-upLow sizing migration and good roller compacted performanceSuitable for high speed processVarious resins compatible
Product codeDensity (tex)Moisture content (%)Size content (%)Breakage strength (N/tex)Net weight (kg)
EDR-12001200Less 0.100.55±0.15≥0.40≥13.0
EDR-24002400Less 0.100.55±0.15≥0.40≥13.0
EDR-44004400Less 0.100.55±0.15≥0.40≥13.0
EDR-48004800Less 0.100.55±0.15≥0.40≥13.0
EDR-96009600Less 0.100.55±0.15≥0.40≥13.0

→Assembled roving:
Which is compatible with unsaturated polyester resin.It delivers properties of low static,excellent dispersion and good wet out in resins.It is mainly used in bathroom,vessels and etc.

It's also called Gun Roving / Spray up roving which is used in the spray-up (chopping) molding process and is the reinforcement of choice for high production open mold manufacturing.

Gun Roving (also known as continuous strand roving) is comprised of many small diameter fiberglass filaments that are combined to form a roving fiber bundle that is wound into a doff or a creel. In the spray-up process, the continuous roving strand is fed into a chopper gun that chops the strands into short lengths and deposits the fiber into a resin spray pattern for application on the mold surface. In this way, the wet-out glass laminate is created from the spray gun. The laminate is then rolled to remove entrapped air and the laminate cures. Gun Roving used in the chopping process provides fast production of larger parts like boat hulls, RV parts, and swimming pools and is the most common reinforcement used in open mold manufacturing.

Features
Even tension
Fast and sufficient wet out
High mechanical properties
No fuzz
Excellent dispersibility

Product code

Linear Density Tolerance

Moisture

Content

LOI

Tensile Strength

Filament of Diameter

Compatible Resin

ECR13-2400A-823

±6

≤0.10

1.05-1.40

≥0.40

13

UP

ECR13-4800A-823

±6

≤0.10

1.05-1.40

≥0.40

13

Packaging & Shipping

The product can be packed on pallet or in small cardboard boxes.

Package height mm (in)260(10)260(10)
Package inside diameter mm(in)100(4)100(4)
Package outside diameter mm(in)270(10.6)310(12.2)
Package Weight kg(lb)17(37.4)23(50.7)

Number of layers3434
Number of doffs per layer1612
Number of doffs per pallet48643648
Net Weight per pallet kg(lb)816(1797.3)1088(2396.5)828(1825.4)1104(2433.9)
Pallet Length mm(in)1120(44)1270(50)
Pallet Width mm(in)1120(44)960(37.8)
Pallet height mm(in)940(37)1180(46.5)940(37)1180(46.5)


Storage

Unless otherwise specified, the fiberglass products should be in dry, cool and moisture-proof area. The room temperature and humidity should be always maintained at 15ºC~35ºC and 35%~65%. It is best if the price is used within 12 months after production date. The fiberglass products should remain in their original packaging until just prior to user.

To ensure safety and avoid damage to the product, the pallets not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, special care should be taken to correctly and smoothly move the top pallet.

Application

Fiberglass Assembled Roving Direct Roving 600tex -1200tex-2400tex -4800tex for Spray up/ Injection / Pipe / Panel /BMC/ SMC/ Lfi /Ltf / Pultrusion


Fiberglass Assembled Roving Direct Roving 600tex -1200tex-2400tex -4800tex for Spray up/ Injection / Pipe / Panel /BMC/ SMC/ Lfi /Ltf / Pultrusion

FAQ


1. What is your terms of packing?
Generally, we pack our goods in carton with pallet
2. What is your tems of payment?
T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.3. What is your terms of delivery?
EXW, FOB, CFR, CIF,L/C at sight4. How about your delivery time?
Generally, it will take 21 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.5. Can you produce according to the samples? Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
6. What is your sample policy?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

7. Do you test all your good before delivery? Yes, we have 100% test before delivery

24 Hours Services Choose us, you will get the key of market!Contact us, we will use the professional knowledge serve you!Wish we can create the great future together!

Our Contact